Bouches du Rhône - FF

The suit that was especially developed for forest fires is of an identical confection as the Bouches du Rhône suit for structure fires but differs in two ways:

  • the base fabric of the jacket is yellow
  • it consists of one layer of fabric

It is equipped with several innovations. The hood of the jacket is adapted to the F2 helmet. It is stowed under the shoulder flap and can easily be accessed by the fireman. In addition the jacket is equipped with a flap to protect the face. This is an autonomous system that can also be used without the hood.

There’s no need to wear an extra belt to attach a fireman’s tools. The jacket is equipped with an incorporated system to which detachable pockets (with a large volume) or an emergency mask can be attached. Several loops are provided to attach gloves, a gas detector, a flashlight, a radio…The balaclava can be stowed in an interior pocket of the jacket.

Comfort is an important feature of PPE. The suit of the SDIS 13 presents an innovation to increase comfort. A system is integrated inside the jacket that can be adapted according to the build of the wearer and the equipment that is attached to the jacket so the protection remains close to the body.

This equipment is in accordance with the EN ISO 15614, the EN 1149-5 and the EN 471 2/2.

Hivis stripings

Fluorescent striping - yellow glass beads

This striping, with a minimum width of 5 cm, only complies for the fluorescent part with the requirements of the EN 471/EN ISO 20471.
Its retroreflective qualities may not be taken into account for the obtention of the EN 471/EN ISO 20471 norm.

Retroreflective striping - silver glass beads (50 mm)

This striping with a minimum width of 50 mm takes advantage of glass beads to reflect the light to make the wearer of the suit visible in dangerous circumstances. In accordance with the requirements of the EN 471/EN ISO 20471.

Fluorescent shoulder flap

The fluorescent matter absorbs the non-visible UV-light that is present in daylight and adapts it to the wavelenght of the light it reflects. Consequently this light ends up in the visible part of the spectre offering a better visibility. 

This phenomenon only produces itself by daylight, in the dark the fluorescent colour reacts as any 'normal' colour would. 

To obtain an EN 471 class 2/2 certification there has to be a minimum of 0.50 m² of fluorescent matter present. In addition to the yellow combined striping FTP1200 or the retroreflective grey striping we use a flame retardant fabric that is in accordance with the demands of the EN 471 (fluo-part). The front flap can be fixed with Velcro or loops and can also be personalized. 

Complex APLW - Tough

Extremely breathable single layer complex, specially developed for forest fire suits.

Complex composition

  1. Outer fabric: DS (double-sided) Nomex®Tough RS Aramid mesh

Jacket specifications

  • Anti-panic zipper with Velcro overlap
  • Detachable radio pockets
  • Napoleon pocket
  • Inside pocket
  • Loop for remote microphone
  • Other loops
  • Name badge
  • Molle system
  • Raglan sleeves
  • Comfort sleeves
  • Cuffs with thumb loop
  • Adjustable cuffs
  • Shoulder pad
  • The striping is fixed with double seams
  • Fluorescent shoulder flap
  • High collar
  • Collar with overlap
  • Large hood that covers the helmet
  • Zip puller
  • Grabbing loop at the bottom of the zip fastener, so it can be closed easily, even with gloves
  • Overlap covering the zip
  • Label flap
  • Bar code
  • Thermoadhesive label (composition, bar code...)
  • Heat resistant thread
  • Double safety stitches

Trousers specifications

  • Wide shape
  • Normal waist trousers
  • Pocket for spanner wrench
  • The striping is fixed with double seams
  • Opening on the side till the knee
  • Reinforced knees: outer fabric
  • Hook fastener
  • Label flap
  • Bar code
  • Thermoadhesive label (composition, bar code...)
  • Double safety stitches
  • Heat resistant thread